Large Size Seals: Precautions for Storage of Seals
2020-11-19
The fluid sealing device in the large-size seal is widely used in the engineering fields of machinery, petroleum, chemical, water conservancy, electric power, light industry, pharmaceutical, urban construction and nuclear industry. With the rapid development of modern chemical, petroleum, atomic energy, aerospace and deep-sea technology, more and more requirements are put forward for the sealing of equipment. However, the failure of large-scale sealing will cause a large amount of waste of energy and raw materials, and the heavy will lead to equipment scrapping, shutdown, and even cause casualties and serious environmental pollution. Therefore, more attention should be paid to the correct use of seals, especially in storage.
View moreMethod of replacing water pump seal
2020-10-26
The method of replacing the water pump seal, the water pump seal components analysis of the relevant contact surface, before installation must be cleaned with anhydrous alcohol. The installation and construction process should be kept clean, is the dynamic, static ring and auxiliary system seal should be free of impurities, dust. Apply clean engine oil or turbine oil to the surface of the moving and static rings.
View moreInternal High Pressure Seal About the Seal Principle
2020-09-02
Regarding the sealing principle of the internal high-pressure seal, the sealing system structure of the non-contact seal is different, and the sealing mechanism is very different, which cannot be classified through detailed analysis.
View moreWhat is the difference between piston rod seal and piston seal
2020-08-28
The piston rod seal has a high superiority in the application, and the link structure design of the piston is also unique to the enterprise. The connection network structure of the piston rod and the piston and the manufacturing technical method of the hydraulic cylinder with it are basically the same.
View moreThe role of the piston rod seal on the piston rod
2020-08-24
The piston rod seal is about the role of the piston rod, the piston rod is connected to the support part of the piston rod, the application of most cylinders, the cylinder moves the actuator member, the movement is the frequent moving parts, the technical requirements are high. Hydraulic cylinder, through the cylinder, piston rod and other parts of the piston cap
View moreWhat is high pressure seal about seal?
2020-08-19
High pressure seal on the understanding of sealing, sealing is the basis of mechanical technology, mechanical equipment seal because of its good tightness, stability, less oil, low friction power consumption, long use time
View more
