News

News And Information

11

2019

-

12

Installation method of piston rod sealing ring

The application of piston rod sealing ring is relatively wide, such as construction machinery, food canning industry and old hydraulic, enterprise equipment maintenance, etc., need to use fixture installation. Of course, there are many ways to install the piston rod sealing ring. According to our needs, before installing the sealing ring, the installation method should be different according to the different models of the sealing ring and the different assembly groove structures. Today, the editor will talk about the installation method of the piston rod sealing ring.


Author:

Piston rod sealing ringThe application range is relatively wide, such as construction machinery, food canning industry and old hydraulic, enterprise equipment maintenance, etc., need to use fixture installation. Sure.Piston rod sealing ringThere are many installation methods. According to our needs, before installing the sealing ring, the installation method should be different according to the different models of the sealing ring and the different assembly groove structures. Today, the editor will talk about the installation method of the piston rod sealing ring.
 
密封圈
 
First of all, let's talk about the installation method of installing the U-shaped sealing ring in the overall groove. In the first step, we need to prepare a pivot with a handle, whose diameter should be the same as that of the piston rod. Next, in order to make the sealing ring easily installed on the piston rod, please apply lubricating oil. Then press the sealing ring with your thumb and load the pivot into the hole. Finally, press down while turning the handle.
 
The installation method of installing the nitrile rubber U-shaped sealing ring in the overall groove is relatively simple. Insert one side of the sealing ring into the groove and pull the other side of the sealing ring, which can easily be inserted into the groove.
 
Install the combined sealing ring in the overall groove. Insert the back-up ring into the sealing assembly groove, prepare a special plunger and push rod, the size of which corresponds to the diameter of the sealing ring, install the sliding ring into the assembly groove On one side, press in the push rod.

Key words:

Piston rod sealing ring,Piston rod seal,Sealing ring