language

News

News And Information

Home page

2022

The installation method of the seal?

Stefen is a product used in the industrial field. Most of us have not seen or heard of it. You can say that it is not very common in life, but they play a very important role in the industrial field. Then our company In the process of use, we must first be familiar with its installation method. Let's talk about it in detail. If you are interested, continue to look down.

Author:

　　StefonIt is a product used in the industrial field. Most of us have not seen or heard of it. You can say that it is not very common in life, but they play a very important role in the industrial field. Then our company must first be familiar with its installation method in the process of use. Let's talk about it in detail. If you are interested, continue to look down.

The installation and assembly of the seal is to install the O-ring first, then install the wear-resistant ring of the seal, and when installing the wear-resistant ring, press the wear-resistant ring a little inside along its diameter direction, then install the wear-resistant ring into the groove, and then smooth the pressed and deformed place by hand. Is it very simple, but we should not be careless when installing, we should make progress step by step, and we should not be careless if we feel simple, so as not to cause unnecessary trouble. Then if the seal is used in winter in the north, the wear-resistant ring must be heated first and then sleeved on the shaft to avoid its use being affected by the low outside temperature. After being sleeved, the shaft must be installed according to the above method after cooling. When placing the shaft, attention must be paid to observe whether the shaft is completely sleeved into the wear-resistant ring, and at the same time, attention should be paid to the guide belt not to jam the shaft, otherwise, it is possible that the guide belt is squeezed out of the groove and then the seal is crushed.

This is slightly different from the installation of the Glaus ring, because the Glaus ring is an oil cylinder seal. In its installation and use, the O-ring is also installed first, and then the wear-resistant ring of the Glaus ring is installed. There will be slight changes here. Their size and specifications make the installation slightly different. For small specifications, direct installation can be adopted, heating with oil first, but the oil temperature here cannot be too high, until the wear-resistant ring is soft, you can put it on the shaft and wait for it to cool down. This is slightly different from the installation of the seal, and the large-size Gelei ring requires a professional tapered sleeve, which is gradually pushed from the small end of the sleeve to the large end, and then pushed into the groove before the installation is completed. If you don't know, you can come here first and click to enter the official website to see the basic information of the company. This company is powerful, it can be seen from the time they were established that they are experienced, and their reputation and reputation are also very good. These basic information can actually be seen on the Internet. As long as these are met, they will certainly attract customers. There are more types of products here.

The content of the above article is to introduce the installation points of Stefen for all friends, hoping to help you!

Key words:

Stefon